Lube Filters



Dirty oil can cause major damage to your engine. Reduce engine wear, remove heat, minimize the possibility of costly downtime and repairs by using the proper lube filter for your equipment.


For your heavy-duty applications, Fisco Inc. pleated cellulose media elements are ideally suited for removal of abrasive contaminants.


The contaminants have few origins:

  • From the lubricating oils and fuel.
  • Those that comes with the assembly of the engine.
  • Connections from 1/2" to 1 1/2" NPT, UNF or Flange.
  • The ones created when the engine runs, when friction between moving parts causes minute pieces of pistons, bearings, etc to break off and circulate through the fluid stream.

The filtration process is done in two ways:

  • Some particles adhere to the filter media as the oil flows through the filter. These particles attach themselves to the media surface without plugging the media pores.
  • Other particles are trapped in the filter media by the pressure of the oil as it flows through the filter. As the oil changes direction in its path through the filter, particles are driven or impinged into the media.

Flow rates are up to 300 GPM/elements, and with a 0.25 to 80 microns range.